Michael Atzmon

Professor

atzmon@umich.edu

2933 Cooley

T: (734) 764-6888

Bio

Publications

Group


Publications

  1. Atzmon, M and Ju, J (2014). Microscopic description of flow defects and relaxation in metallic glassesPhysical Review E, 90:042313.   (link)

  2. Ju, J and Atzmon, M (2014). Atomistic interpretation of the dynamic response of glassesMRS Communications, 4:63.

  3. Ju, JD and Atzmon, M (2014). A comprehensive atomistic analysis of the experimental dynamic-mechanical response of a metallic glassActa Mater., 74:183.

  4. Jiang, W and Atzmon, M (2011). Room-temperature flow in a metallic glass -- strain-rate dependence of shear-band behaviorJournal of Alloys and Compounds , 509:7395.

  5. Ju, J, Jang, D, Nwankpa, A, and Atzmon, M (2011). An atomically quantized hierarchy of shear transformation zones in a metallic glassJournal of Applied Physics, 109:053522.

  6. Jang, D and Atzmon, M (2006). Grain-boundary relaxation and its effect on plasticity in nanocrystalline FeJournal of Applied Physics, 99:083504.

  7. Jiang, W and Atzmon, M (2006). Plastic flow of an amorphous/nanocrystalline Al90Fe5Gd5 composite formed by rollingIntermetallics, 14:962.

  8. Jiang, W and Atzmon, M (2006). Mechanically-assisted nanocrystallization and defects in amorphous alloys: a high-resolution transmission electron microscopy studyScripta Materialia, 54:333.

  9. Jiang, W and Atzmon, M (2005). Mechanical strength of nanocrystalline/amorphous Al90Fe5Gd5 composites produced by rollingAppl. Phys. Lett., 86(15).

  10. Jiang, W, Pinkerton, F, and Atzmon, M (2005). Deformation-induced nanocrystallization: A comparison of two amorphous Al-based alloysJ. Mater. Res., 20(3):696.

  11. Jiang, W, Pinkerton, F, and Atzmon, M (2005). Mechanical behavior of shear bands and the effect of their relaxation in a rolled amorphous Al-based alloyActa Mater., 53(12):3469.

  12. Zu, X, Sun, K, Atzmon, M, Wang, L, You, L, Wan, F, Busby, J, Was, G, and Adamson, R (2005). Effect of proton and Ne irradiation on the microstructure of Zircaloy 4Philos. Mag., 85(4-7):649.

  13. Jang, D and Atzmon, M (2003). Grain-size dependence of plastic deformation in nanocrystalline FeJ. Appl. Phys., 93(11):9282.

  14. Jiang, W and Atzmon, M (2003). Rate dependence of serrated flow in a metallic glassJ. Mater. Res., 18(4):755.

  15. Jiang, W and Atzmon, M (2003). The effect of compression and tension on shear-band structure and nanocrystallization in amorphous Al90Fe5Gd5 : a high-resolution transmission electron microscopy studyActa Mater., 51(14):4095.

  16. Jiang, W, Pinkerton, F, and Atzmon, M (2003). Deformation-induced nanocrystallization in an Al-based amorphous alloy at a subambient temperatureScr. Mater., 48(8):1195.

  17. Jiang, W, Pinkerton, F, and Atzmon, M (2003). Effect of strain rate on the formation of nanocrystallites in an Al-based amorphous alloy during nanoindentationJ. Appl. Phys., 93(11):9287.

  18. Boyer, W and Atzmon, M (2000). Interdependence of stress and interdiffusion during solid-state amorphization in Ni-HfJ. Mater. Res., 15(2):463.

  19. Tian, H and Atzmon, M (2000). Non-monotonic decomposition in the immiscible Ag-Cu system, 343-3:284.

  20. Tian, H and Atzmon, M (1999). Comparison of X-ray analysis methods used to determine the grain size and strain in nanocrystalline materialsPhilos. Mag. A-Phys. Condens. Matter Struct. Defect Mech. Prop., 79(8):1769.

  21. Tian, H and Atzmon, M (1999). Kinetics of microstructure evolution in nanocrystalline Fe powder during mechanical attritionActa Mater., 47(4):1255.

  22. Was, G, Allen, T, Busby, J, Gan, J, Damcott, D, Carter, D, Atzmon, M, and Kenik, E (1999). Microchemistry and microstructure of proton-irradiated austenitic alloys: toward an understanding of irradiation effects in LWR core componentsJ. Nucl. Mater., 270(1-2):96.

  23. Xu, J, Collins, G, Peng, L, and Atzmon, M (1999). Deformation-assisted decomposition of unstable Fe50Cu50 solid solution during low-energy ball millingActa Mater., 47(4):1241.

  24. Xu, J and Atzmon, M (1998). Temperature dependence of deformation-assisted crystallization in amorphous Fe-78 B13SigAppl. Phys. Lett., 73(13):1805.

  25. Cookson, J, Was, G, Allen, T, Atzmon, M, Carter, R, Damcott, D, and Gan, J (1996). The effects of preferential sputtering phenomenon on SSRT test of AISI304 stainless steel - CommentScr. Mater., 34(5):839.

  26. Goodrich, D and Atzmon, M (1996). Microstructural evolution in ball-milled iron powder, 225:223.

  27. Ma, E and Atzmon, M (1995). Phase-Transformations Induced By Mechanical Alloying In Binary-SystemsMater. Chem. Phys., 39(4):249.

  28. Carter, R, Damcott, D, Atzmon, M, Was, G, Bruemmer, S, and Kenik, E (1994). Quantitative-Analysis of Radiation-Induced Grain-Boundary Segregation MeasurementsJ. Nucl. Mater., 211(1):70.

  29. Adams, C, Srolovitz, D, and Atzmon, M (1993). Monte-Carlo Simulation of Phase-Separation During Thin-Film CodepositionJ. Appl. Phys., 74(3):1707.

  30. Boyer, W and Atzmon, M (1993). The Effect of Nonlinear Diffusion On Solid-State Amorphization In Ni-Hf - Experiment And SimulationJ. Alloy. Compd., 194(2):213.

  31. Carter, R, Damcott, D, Atzmon, M, Was, G, and Kenik, E (1993). Effects of Proton Irradiation On The Microstructure And Microchemistry of Type-304l Stainless-SteelJ. Nucl. Mater., 205:361.

  32. Cookson, J, Carter, R, Damcott, D, Atzmon, M, and Was, G (1993). Irradiation Assisted Stress-Corrosion Cracking of Controlled Purity 304l Stainless-SteelsJ. Nucl. Mater., 202(1-2):104.

  33. Ma, E and Atzmon, M (1993). Enthalpies of Formation And Crystallization of Amorphous Zr1-xAlx And Zr1-xNix Alloys - Calculations Compared With MeasurementsJ. Alloy. Compd., 194(2):235.

  34. Ma, E, Atzmon, M, and Pinkerton, F (1993). Thermodynamic And Magnetic-Properties of Metastable Fexcu100-X Solid-Solutions Formed By Mechanical AlloyingJ. Appl. Phys., 74(2):955.

  35. Ma, E, Pagan, J, Cranford, G, and Atzmon, M (1993). Evidence For Self-Sustained Mosi2 Formation During Room-Temperature High-Energy Ball-Milling of Elemental PowdersJ. Mater. Res., 8(8):1836.

  36. Najafabadi, R, Srolovitz, D, Ma, E, and Atzmon, M (1993). Thermodynamic Properties of Metastable Ag-Cu AlloysJ. Appl. Phys., 74(5):3144.

  37. Adams, C, Atzmon, M, Cheng, Y, and Srolovitz, D (1992). Phase-Separation During Codeposition of Al-Ge Thin-FilmsJ. Mater. Res., 7(3):653.

  38. Atzmon, M (1992). Calculation And Simulation of Chemical-Diffusion Coefficients - The Inadequacy of The Mean-Field Theory - ReplyPhys. Rev. Lett., 68(9):1439.

  39. Atzmon, M (1992). The Effect of Interfacial Diffusion-Barriers On The Ignition of Self-Sustained Reactions In Metal-Metal Diffusion Couples, 23(1):49.

  40. Atzmon, M, Kessler, D, and Srolovitz, D (1992). Phase-Separation During Film GrowthJ. Appl. Phys., 72(2):442.

  41. Adams, C, Atzmon, M, Cheng, Y, and Srolovitz, D (1991). Transition From Lateral To Transverse Phase-Separation During Film CodepositionAppl. Phys. Lett., 59(20):2535.

  42. Atzmon, M (1991). Characterization of Alni Formed By a Self-Sustaining Reaction During Mechanical AlloyingMater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 134:1326.

  43. Damcott, D, Cookson, J, Carter, R, Martin, J, Atzmon, M, and Was, G (1991). Proton-Induced Grain-Boundary Segregation In Stainless-SteelRadiat. Eff. Defects Solids, 118(4):383.

  44. Ma, E and Atzmon, M (1991). Calorimetric Evidence For Polymorphous Constraints On Metastable Zr-Al Phase Formation By Mechanical AlloyingPhys. Rev. Lett., 67(9):1126.

  45. Atzmon, M (1990). Calculation And Simulation of Chemical-Diffusion Coefficients - The Inadequacy of The Mean-Field TheoryPhys. Rev. Lett., 65(23):2889.

  46. Atzmon, M (1990). Insitu Thermal Observation of Explosive Compound-Formation Reaction During Mechanical AlloyingPhys. Rev. Lett., 64(4):487.

  47. Atzmon, M (1990). Monte-Carlo Simulations of Spinodal Ordering And Decomposition In Compositionally Modulated AlloysJ. Mater. Res., 5(1):92.

  48. Maret, M, Chieux, P, Hicter, P, Atzmon, M, and Johnson, W (1987). Partial Structure Factors And Chemical Short-Range Order In Ni33Y67 And Cu33Y67 Metallic Glasses, 17(2):315.

  49. Atzmon, M, Unruh, K, and Johnson, W (1985). Formation And Characterization of Amorphous Erbium-Based Alloys Prepared By Near-Isothermal Cold-Rolling of Elemental CompositesJ. Appl. Phys., 58(10):3865.

  50. Wright, A, Hannon, A, Clare, A, Sinclair, R, Johnson, W, Atzmon, M, and Mangin, P (1985). A Neutron-Diffraction Investigation of The Atomic And Magnetic-Structure of Amorphous Dy7ni3, 46(C-8):299.

  51. Atzmon, M, Verhoeven, J, Gibson, E, and Johnson, W (1984). Formation And Growth of Amorphous Phases By Solid-State Reaction In Elemental Composites Prepared By Cold-WorkingAppl. Phys. Lett., 45(10):1052.

  52. Williams, A, Eckert, J, Yeh, X, Atzmon, M, and Samwer, K (1984). Inelastic Neutron-Scattering From Amorphous Hydride of Zr2PdJ. Non-Cryst. Solids, 61-2(JAN):643.

  53. Wright, A, Hannon, A, Sinclair, R, Johnson, W, and Atzmon, M (1984). The Neutron-Diffraction Double-Null Isotopic-Substitution Technique, 14(10):L201.

  54. Atzmon, M and Johnson, W (1983). A Cooling Rate Dependent Structure of Amorphous (AuxCu1-x)91la9J. Non-Cryst. Solids, 55(3):395.