Procedure for Obtaining hysteresis loop for BaTiO3

Prepared by:

J. Scanlon

Location:

Dow 2219

Hazards:

The following materials and equipment associated with this procedure present exposure or physical health hazards. Safety precautions are prudent and mandatory.



Controls:

Prior to performing this procedure, the following safety equipment must be accessible and ready for use: (e.g. chemical fume hood, biological safety cabinet, laminar flow hood, chemical spill kits)



Protective Equipment:

Prior to performing this procedure, the following personal protective equipment must be obtained and ready for use: (e.g. acid resistant gloves, safety eyewear, lab coat, chemical splash apron)



Waste Disposal:

This procedure will result in the follow regulated waste which must be disposed of in compliance with environmental regulations.



Spill:

In the event that a hazardous material spills during this procedure, be prepared to execute the emergency procedure below.


Instructions:


Click here (pdf) for the procedure used for MSE 360, Ferroelectrics lab.


Equipment:


Last Revision:

Sep 19, 2020