Clark Microhardness Tester (Vickers/Knoop) CM-400AT

Prepared by:

J. Scanlon

Location:

Dow 2224

Hazards:

The following materials and equipment associated with this procedure present exposure or physical health hazards. Safety precautions are prudent and mandatory.

None.



Controls:

Prior to performing this procedure, the following safety equipment must be accessible and ready for use: (e.g. chemical fume hood, biological safety cabinet, laminar flow hood, chemical spill kits)

None.



Protective Equipment:

Prior to performing this procedure, the following personal protective equipment must be obtained and ready for use: (e.g. acid resistant gloves, safety eyewear, lab coat, chemical splash apron)

None.



Waste Disposal:

This procedure will result in the follow regulated waste which must be disposed of in compliance with environmental regulations.

None.



Spill:

In the event that a hazardous material spills during this procedure, be prepared to execute the emergency procedure below.

Not Applicable.


Instructions:


Vickers Indentor

No outside training. For training please see an MSE tech staff member. Thank you.

Click here for general indentor instructions.

 

 

For more detailed information, please see the owner’s manual in the drawer underneath the indentor.


Equipment:


Last Revision:

Nov 16, 2009