Publications

Brian Love

Professor

bjlove@umich.edu

2046 H.H. Dow
T: (734) 763-2013

Bio

Publications

Facilities

Group


  1. JM Rieland, Z Hu, JS Deese, and BJ Love, Pressure sensitive adhesives for quantifying microplastic isolation, Separation and Purification Technology, 2023: 307:122819. 
  2. JM Rieland, S Nikifshar, Z Hu, M Nejad, and BJ Love, Ionic liquid-mediated biopolymer extraction from coffee fruit, Macromolecular Materials and Engineering, 2023: 2300145, 
  3. R Su, Z Zhang, BJ Love, and AJ Shih, Fused filament fabrication of nylon beyond the glass transition temperature in a thermally insulated machine, Manufacturing letters, 2023:35:797-804.
  4. K Beizadeh, JM Rieland, CB Eastman, DJ Duffy and BJ Love, Characterization of ingested microparticles extracted from sea turtle post hatchlings at necropsy, Microplastics, 2022:1:254-262.
  5. PZ Chazovachii,  JM Rieland, VV Sheffrey, TME Jugovic, PM Zimmerman, BJ Love and AJ McNeil., Using Adhesives to capture microplastics from water ACS ES&T Engineering, 2022:1:1698-1704. 
  6. A Pine, CC Su, S Raghavan and BJ Love, The efficiency of dehydrating desiccants by centrifugation, An assessment of superabsorbent polymers, Drying Technology, 2022:40:2360-2367.
  7. R Tennekore, M Brunette, T Cox, R Vasquez, S Shikanov, ML Burns, BJ Love, Swellable catheters based on a swellable inner diameter, Journal of Materials Science, Materials in Medicine, 2021:32:5.
  8. CC Wu, S Raghavan, A Pine, J Alfaro, BJ Love and DI Collias, Dewatering of superabsorbent polymers: an alternative to thermal desorption by liquid phase extraction using dimethyl ether, Resources, Conservation and Recycling, 2021:171:105641.
  9. LM Mensah and BJ Love, A meta analysis of bone cement mediated antibiotic release, Overkill, but a viable approach to eradicate osteomyelitis and other infections tied to open procedures, Materials Science and Engineering C, 2021:32:51.
  10. JM Rieland and BJ Love, Ionic Liquids, A milestone on the pathway to greener recycling of cellulose from biomass, Resources, Conservation and Recycling, 2020, 155:111999.
  11. BJ Love and ML Burns, Corked, Tales of Advantage in Competitive Sport, ISBN 978-947-989-37-5, 2019.
  12. Thompson, AL, Mensah, LM, and Love, BJ (2019). The effect of cisplatin on the nanoscale structure of aqueous PEO-PPO-PEO micelles of varying hydrophilicity observed using SAXS,  SOFT MATTER, 15(19):3970–3977.

  13. Thompson, AL, Ball, AN, and Love, BJ (2018). Controlled Release Characteristics of Aqueous PEO-PPO-PEO Micelles With Added Malachite Green, Erythrosin, and Cisplatin Determined by UV-Visible SpectroscopyJOURNAL OF SURFACTANTS AND DETERGENTS, 21(1):5–15.

  14. Love, B (2017). Biomaterials: A Systems Approach to Engineering Concepts,  In: , pp. 1-387.

  15. Thompson, AL and Love, BJ (2017). Thermodynamic properties of aqueous PEO-PPO-PEO micelles of varying hydrophilicity with added cisplatin determined by differential scanning calorimetry,  JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 127(2):1583–1592.

  16. Zheng, S and Love, BJ (2016). A meta analysis of beta-lactoglobulin aggregation kinetics comparing temperature, concentration, and chemistry as modulating influences,  JOURNAL OF FOOD ENGINEERING, 188:8–12.

  17. Batzli, KM and Love, BJ (2015). Agitation of amyloid proteins to speed aggregation measured by ThT fluorescence: A call for standardization,  Materials Science and Engineering C, 48:359-364.   (link)

  18. Batzli, KM and Love, BJ (2015). Formation of platinum-coated templates of insulin nanowires used in reducing 4-nitrophenol,  Materials Science and Engineering C, 48:103-111.   (link)

  19. Thompson, A and Love, B (2013). Thermodynamic properties of aqueous PEO-PPO-PEO micelles with added methylparaben determined by differential scanning calorimetry,  Journal of Colloid and Interface Science, 398:270-272.

  20. Tomeckova, V, Norton, S, Love, B, and Halloran, J (2013). Photopolymerization of acrylate suspensions with visible dyes,  Journal of the European Ceramic Society, 33(4):699-707.

  21. Yousefi, A and Love, B (2013). Probing the temperature sensitivity of induction time in latent cure epoxy resins,  Polymer International, 62(10):1451-1456.

  22. Batzli, K and Love, B (2012). Aggregation behavior of bovine and porcine insulin in presence of inhibitorsBulletin of the American Physical Society, 57.

  23. Batzli, K and Love, B (2012). Amyloid fibril inhibition by small molecules,  Abstracts of Papers of the American Chemical Society, 244.

  24. Juggernauth, K and Love, B (2012). Correlating nanoscale structural changes to macromolecular gel formation in Laponite containing Pluronic F127 photogeling systems,  Bulletin of the American Physical Society, 57.

  25. Love, B and Batzli, K (2012). Analytical centrifugation of commercial fabric softener suspensions: Determination of a Stokes sedimentation regime to infer particle size,  Abstracts of Papers of the American Chemical Society, 244.

  26. Popp, J, Laflin, K, Love, B, and Goldstein, A (2012). Fabrication and characterization of poly (lactic-co-glycolic acid) microsphere/amorphous calcium phosphate scaffolds,  Journal of Tissue Engineering and Regenerative Medicine, 6(1):12-20.

  27. Popp, J, Laflin, K, Love, B, and Goldstein, A (2012). Fabrication and characterization of poly(lactic-co-glycolic acid) microsphere/amorphous calcium phosphate scaffolds,  Journal of Tissue Engineering and Regenerative Medicine, 6(1):12-20.

  28. Tomeckova, V, Teyssandier, F, Norton, S, Love, B, and Halloran, J (2012). Photopolymerization of Acrylate Suspensions,  Journal of Photochemistry and Photobiology A: Chemistry.

  29. Tomeckova, V, Teyssandier, F, Norton, S, Love, B, and Halloran, J (2012). Photopolymerization of acrylate suspensions,  Journal of Photochemistry and Photobiology A-Chemistry, 247:74-81.

  30. Juggernauth, K, Gros, A, Meznarich, N, and Love, B (2011). In situ photogelation kinetics of Laponite nanoparticle-based photorheological dispersions,  Soft Matter, 7(21):10108-10115.

  31. Meznarich, N and Love, B (2011). The Kinetics of Gel Formation for PEO- PPO- PEO Triblock Copolymer Solutions and the Effects of Added Methylparaben,  Macromolecules, 44(9):3548-3555.

  32. Meznarich, N, Juggernauth, K, Batzli, K, and Love, B (2011). Structural Changes in PEOÐPPOÐPEO Gels Induced by Methylparaben and Dexamethasone Observed Using Time-Resolved SAXS,  Macromolecules, 44(19):7792-7798.

  33. Popp, J, Laflin, K, Love, B, and Goldstein, A (2011). In vitro evaluation of osteoblastic differentiation on amorphous calcium phosphate-decorated poly (lactic-co-glycolic acid) scaffolds,  Journal of Tissue Engineering and Regenerative Medicine, 5(10):780-789.

  34. Prado, S, Weaver, J, and Love, B (2011). Gelation of photopolymerized hyaluronic acid grafted with glycidyl methacrylate,  Materials Science and Engineering: C, 31(8):1767-1771.

  35. Sharpe, L, Boerio, F, Brogly, M, Drzal, L, Feldstein, M, Kinloch, A, Possart, W, Takemura, A, Baier, R, and Brown, H (2011). Editorial Board EOV,  The Journal of Adhesion, 87(12).

  36. Teyssandier, F and Love, B (2011). MMA bulk polymerization and its influence on in situ resin viscosity comparing several chemorheological models,  Journal of Applied Polymer Science, 120(3):1367-1371.

  37. Green, M, Goforth, P, Satin, L, and Love, B (2010). An integrated instrument for rapidly deforming living cells using rapid pressure pulses and simultaneously monitoring applied strain in near real time,  The Review of scientific instruments, 81(12).

  38. Savart, T, Dove, C, and Love, B (2010). In situ Dynamic Rheological Study of Polyacrylamide during Gelation Coupled with Mathematical Models of Viscosity Advancement,  Macromolecular Materials and Engineering, 295(2):146-152.

  39. Teyssandier, F, Ivankovic«, M, and Love, B (2010). Modeling the effect of the curing conversion on the dynamic viscosity of epoxy resins cured by an anhydride curing agent,  Journal of Applied Polymer Science, 115(3):1671-1674.

  40. Teyssandier, F and Love, B (2009). Cure advancement of urethane networks using a sigmoidal chemorheological model,  Polymer Engineering & Science, 50(3):499-503.

  41. Burguera, E, Love, B, Sahul, R, Ngatu, G, and Wereley, N (2008). A Physical Basis for Stability in Bimodal Dispersions Including Micrometer-sized Particles and Nanoparticles using Both Linear and Non-linear Models to Describe Yield,  Journal of Intelligent Material Systems and Structures, 19(11):1361-1367.

  42. Love, B, Ruinet, F, and Teyssandier, F (2008). Chemorheology of photopolymerizable acrylates using a modified Boltzmann sigmoidal model,  Journal of Polymer Science Part B: Polymer Physics, 46(21):2319-2325.

  43. Love, B, Teyssandier, F, Sun, Y, and Wong, C (2008). Sigmoidal Chemorheological Models of Chip-Underfill Materials Offer Alternative Predictions of Combined Cure and Flow,  Macromolecular Materials and Engineering, 293(10):832-835.

  44. McKeon, K and Love, B (2008). The presence of adsorbed proteins on particles increases aggregated particle sedimentation, as measured by a light scattering technique,  The Journal of Adhesion, 84(7):664-674.

  45. Piguet-Ruinet, F and Love, B (2008). Dynamic photorheological analysis of photopolymerizable urethane dimethacrylate resins with varying diluent content and light fluence,  Journal of Applied Polymer Science, 107(3):1523-1529.

  46. Teyssandier, F, Sun, Y, Wong, C, and Love, B (2008). Cure versus Flow in Dispersed Chip-Underfill MaterialsMacromolecular Materials and Engineering, 293(10):828-831.

  47. Cassino, T, Anderson, R, Love, B, Huckle, W, Seamans, D, and Forsten-Williams, K (2007). Design and application of an oscillatory compression device for cell constructs,  Biotechnology and bioengineering, 98(1):211-220.

  48. Huyck, R, Trenor, S, Love, B, and Long, T (2007). Photodimerization of Coumarin Functionalized Poly (alkyl Acrylate) and Poly (alkyl Methacrylate) Random Copolymers: Influence of Copolymer Composition on Photocrosslinking,  Journal of Macromolecular Science, Part A: Pure and Applied Chemistry, 45(1):9-15.

  49. Ikuma, K, Henriques, I, Love, B, and Love, N (2007). IMMOBILIZATION OF PSEUDOMONAS AERUGINOSA IN ALGINATE MICROBEADS FOR USE IN A BIOSENSOR DESIGNED TO DETECT OXIDATIVE TOXINS,  Proceedings of the Water Environment Federation, 2007(13):4983-5000.

  50. Love, B and Piguet-Ruinet, F (2007). Analyzing the dynamic chemorheology of curing resins: Extraction of model parameters associated with cure advancement,  Journal of Applied Polymer Science, 106(6):3605-3609.

  51. Popp, J, Love, B, and Goldstein, A (2007). Effect of soluble zinc on differentiation of osteoprogenitor cellsJournal of Biomedical Materials Research Part A, 81(3):766-769.

  52. Burguera, E and Love, B (2006). Reduced transglutaminase-catalyzed protein aggregation is observed in the presence of creatine using sedimentation velocity,  Analytical biochemistry, 350(1):113-119.

  53. Wereley, N, Chaudhuri, A, Yoo, J, John, S, Kotha, S, Suggs, A, Radhakrishnan, R, Love, B, and Sudarshan, T (2006). Bidisperse magnetorheological fluids using Fe particles at nanometer and micron scale,  Journal of Intelligent Material Systems and Structures, 17(5):393-401.

  54. Whited, B, Goldstein, A, Skrtic, D, and Love, B (2006). Fabrication and characterization of poly (DL-lactic-co-glycolic acid)/zirconia-hybridized amorphous calcium phosphate composites,  Journal of Biomaterials Science, Polymer Edition, 17(4):403-418.

  55. Whited, B, Skrtic, D, Love, B, and Goldstein, A (2006). Osteoblast response to zirconia-hybridized pyrophosphate-stabilized amorphous calcium phosphate,  Journal of Biomedical Materials Research Part A, 76(3):596-604.

  56. Trenor, S, Long, T, and Love, B (2005). Crystallization of photo-chain extended poly (ethylene glycol)European polymer journal, 41(2):219-224.

  57. Trenor, S, Long, T, and Love, B (2005). Development of a light-deactivatable PSA via photodimerizationJournal of Adhesion, 81(2):213-229.

  58. Jackson, M and Love, B (2004). Dicyandiamide precipitation in epoxy solutions and latex dispersions: threshold concentration analysis using a two-stage drying model,  Polymer, 45(21):7229-7238.

  59. Linares, K, Fleming, D, Xu, Y, Love, N, Love, B, and Meehan, K (2004). Evaluating strategies for integrating bacterial cells into a biosensor designed to detect electrophilic toxins,  Proceedings of the Water Environment Federation, 2004(15):608-624.

  60. Love, B (2004). Analytical model development for Stokes-type settling in a solidifying fluid,  Particulate science and technology, 22(3):285-290.

  61. Suggs, A, Dolez, P, and Love, B (2004). Adaptation of acrylic photopolymerized resins as model bone cements in total hip arthroplasties,  Journal of adhesion science and technology, 18(10):1091-1101.

  62. Trenor, S, Long, T, and Love, B (2004). Photoreversible chain extension of poly (ethylene glycol)Macromolecular Chemistry and Physics, 205(6):715-723.

  63. Trenor, S, Shultz, A, Love, B, and Long, T (2004). Coumarins in polymers: from light harvesting to photo-cross-linkable tissue scaffolds,  Chemical Reviews-Columbus, 104(6):3059-3078.

  64. Xu, Y, Lei, G, Booker, A, Linares, K, Fleming, D, Meehan, K, Lu, G, Love, N, and Love, B (2004). Maximizing dye fluorescence via incorporation of metallic nanoparticles in solution,  Proc. SPIE, 5591:174-184.

  65. Xu, Y, Linares, K, Meehan, K, Love, B, and Love, N (2004). pH Dependent Optical Properties of Surface Modified Gold Nanoparticles Using a Bovine Serum Albumin Coating,  NSTI Nanotech Proc, 1:15-18.

  66. Dolez, P, Williams, C, Goff, A, and Love, B (2003). Properties of Photopolymerisable Acrylic Adhesives for Underwater Bonding,  Underwater Technology: The International Journal of the Society for Underwater, 25(4):199-208.

  67. Esterly, D and Love, B (2003). Phase transformation to \beta-poly (vinylidene fluoride) by milling,  Journal of Polymer Science Part B: Polymer Physics, 42(1):91-97.

  68. Long, T, Elkins, C, Kilian, L, Park, T, Trenor, S, Yamauchi, K, Colby, R, Leo, D, and Love, B (2003). ÒReversible MacromoleculesÓ as Scaffolds for Adaptive Structures,  .

  69. Long, T, Elkins, C, Kilian, L, Park, T, Trenor, S, Yamauchi, K, Colby, R, Leo, D, and Love, B (2003). IMECE2003-43010" Reversible Macromolecules" as Scaffolds for Adaptive Structures,  ASME-PUBLICATIONS-AD, 68:229-236.

  70. Maciborski, J, Dolez, P, and Love, B (2003). Construction of iso-concentration sedimentation velocities using Z-axis translating laser light scattering,  Materials Science and Engineering: A, 361(1):392-396.

  71. Puncture, F, Love, B, and Kalista, S (2003). Self-Healing of Thermoplastic Poly (Ethylene-co-Methacrylic Acid) Copolymers,  .

  72. Suloff, E, Marcy, J, Brooks, D, and Love, B (2003). Preparation of polymeric stationary phase for use in inverse gas chromatography,  Polymer-Plastics Technology and Engineering, 42(5):959-970.

  73. Trihan, J, Yoo, J, Wereley, N, Kotha, S, Suggs, A, Radhakrishnan, R, Sudarshan, T, and Love, B (2003). Impact of varying concentrations of nanometer-sized particles in a bidisperse magnetorheological fluidInternational Society for Optics and Photonics.

  74. Wereley, N, Trihan, J, Kotha, S, Suggs, A, Radhakrishnan, R, Love, B, and Sudarshan, T (2003). Nanometer and Micron Sized Particles in a Bidisperse Magnetorheological Fluid,  .

  75. Dolez, P and Love, B (2002). Acid cleaning solutions for barnacle-covered surfaces,  International journal of adhesion and adhesives, 22(4):297-301.

  76. DOLEZ, P, ERSON, R, MAREK, M, and LOVE, B (2002). Photocuring induced adhesion evolution in marine environments,  Adhesive Joints: Formation, Characteristics and Testing, 2:79.

  77. Dolez, P, Goff, A, and Love, B (2002). Settling behavior of specific acrylic particles in bis-GMA based reactive slurries,  Separation science and technology, 37(9):2007-2019.

  78. Hoffman, D, Brooks, D, Dolez, P, and Love, B (2002). Design of a z-axis translating laser light scattering device for particulate settling measurement in dispersed fluids,  Review of scientific instruments, 73(6):2479-2482.

  79. Subrahmanyan, S, Dillard, J, Love, B, Romand, M, and Charbonnier, M (2002). Transience of plasma surface modification as an adhesion promoter for polychlorotrifluorethylene,  Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 20(3):707-713.

  80. Trenor, S, Suggs, A, and Love, B (2002). Influence of penetration enhancers on the thermomechanical properties and peel strength of a poly (isobutylene) pressure sensitive adhesive,  Journal of materials science letters, 21(17):1321-1323.

  81. Cotton, J, Grant, J, Jensen, M, and Love, B (2001). Analytical solutions to the shear strength of interfaces failing under flexure loading conditions,  International journal of adhesion and adhesives, 21(1):65-70.

  82. Courson Jr, B, Wood, J, and Love, B (2001). Chemiluminescent photo-curable adhesive curing and bonding system,  .

  83. Dolez, P and Love, B (2001). Adhesive bonding as an alternative for underwater structural repair,  Eleventh International Offshore and Polar Engineering Conference, Stavanger, Norway:17-22.

  84. Dolez, P, Marek, M, and Love, B (2001). Photopolymerizable acrylic resin: effect of curing time and temperature,  Journal of Applied Polymer Science, 82(3):546-554.

  85. Holton, C, Love, B, Muelenaer, A, and Dolez, P (2001). Light activated composite stents and vascular prosthetics,  .

  86. Trenor, S, Renshaw, K, Marek, M, Forsten, K, and Love, B (2001). Influence of surface chemistry on particle-particle aggregation as measured by a Coulter Counter in the low concentration regime,  Journal of adhesion science and technology, 15(10):1189-1198.

  87. Wimmer, R, Barker, S, Waddell, E, Suggs, A, Locascio, L, Love, B, and Love, N (2001). DEVELOPMENT OF AN UPSET EARLY WARNING DEVICE (UEWD) TO PREDICT DEFLOCULATION EVENTS,  Proceedings of the Water Environment Federation, 2001(13):731-746.

  88. Freeman, M, Furey, M, Love, B, and Hampton, J (2000). Friction, wear, and lubrication of hydrogels as synthetic articular cartilage,  Wear, 241(2):129-135.

  89. Jensen, M, Love, B, Grant, J, Cotton, J, Keiser, J, and Wilson, D (2000). Comparison study of dicyandiamide-cured epoxy bonded steel joints and polyamidoamine-cured epoxy bonded steel joints,  International journal of adhesion and adhesives, 20(6):437-444.

  90. Love, B and Forsten, K (2000). A particle adhesion perspective on metastasis,  The Journal of Adhesion, 74(1-4):1-17.

  91. Starling Jr, K and Love, B (2000). Orthodontic adhesive,  .

  92. Trenor, S and Love, B (2000). Characterization of a novel photocurable acrylic resin,  Adhesion Society, Proceedings of the 23 rd Annual Meeting of the Adhesion Society(USA):237-239.

  93. Dolez, P and Love, B (1999). Structural Property Characterization of a Photopolymerizable Acrylic Resin Cured Underwater,  POLYMERIC MATERIALS SCIENCE AND ENGINEERING-WASHINGTON-, 81:407-408.

  94. Jackson, M, Love, B, and Hebner, S (1999). Effects of environmental exposure on solvent-and water-based epoxy systems,  Journal of Materials Science: Materials in Electronics, 10(1):71-79.

  95. Love, B, Baborowski, J, Charbonnier, M, and Romand, M (1999). Surface chemical characterization of copper oxide and its relationship to adhesion in formed epoxy/copper interfaces,  The Journal of Adhesion, 69(1-2):165-179.

  96. Vaubert, V, Moon, P, and Love, B (1999). Extractable free monomers from self-cured dental sealants resulting from dispensing errors,  Journal of biomedical materials research, 48(1):5-8.

  97. Baborowski, J, Love, B, Romand, M, and Charbonnier, M (1998). ƒtude par Žmission de rayons X de films d'oxyde de cuivre formŽs sur des substrats de cuivre,  Le Journal de Physique IV, 8(PR5).

  98. Courson, B, Love, B, Grant, J, Holton, C, and Crivello, J (1998). Underwater Adhesives/Attachments,  .

  99. Furey, M, Freeman, M, Love, B, and Hampton, J (1998). Friction, wear, and lubriction of hydrogels as synthetic articular cartilage,  Wear(Switzerland), 241(2):129-135.

  100. Love, B and Packman, P (1998). The contributions of morphological and surface chemical modifications to the elevated-temperature ageing of copperÐepoxy interfaces,  Journal of materials science, 33(5):1359-1367.

  101. Love, B, Cherry, K, Longhenry, J, Murthy, N, and Bednarczyk, C (1998). Transcrystallinity at interior boundaries in multilayer crystalline PCTFE films,  Journal of materials science letters, 17(19):1681-1683.

  102. Renshaw, K and Love, B (1998). PLENARY SESSION II-Session 19: Poster Session-CARDIOVASCULAR-Protein Adsorption Characteristics on Modified Vascular Graft Materials,  Critical Reviews in Biomedical Engineering, 26(5):397-397.

  103. Longhenry, J, Love, B, and Murthy, N (1997). Cooling rate-induced glass-adhesion variations using crystallizing hot-melt adhesives,  Journal of materials science, 32(9):2283-2289.

  104. Medding, J and Love, B (1996). Evaluation of collisional damage in polystyrene foam constructions using a dual hammer impact test,  Polymer Engineering & Science, 36(9):1286-1289.

  105. Wilson, T and Love, B (1995). Clinical effectiveness of fluoride-releasing elastomers. II. Enamel microhardness levels,  American Journal of Orthodontics and Dentofacial Orthopedics, 107(4):379-381.

  106. Love, B and Baughn, T (1994). Controlling adhesion of orthodontic adhesives through adjustment of the interphase mechanical properties,  The Journal of Adhesion, 45(1-4):149-159.

  107. Love, B and Packman, P (1993). Effects of surface modifications on the peel strength of copper based polymer/metal interfaces with characteristic morphologies,  The Journal of Adhesion, 40(2-4):139-150.

  108. Starling Jr, K and Love, B (1993). Plasticization of adhesive to improve debonding of ceramic bracketsJournal of clinical orthodontics: JCO, 27(6):319.

  109. Gordon, R, Love, B, Peterson, R, and Ozmat, B (1990). Ceramic based substrate for electronic circuit system modules,  .

  110. Love, B (1990). Chemical and morphological characteristics of the epoxy-copper interface,  PhD thesis, Southern Methodist University.

  111. Cassino, T, Anderson, R, Love, B, Huckle, W, and Williams, K (). Mechanical Compression of Chondrocytes: Design and Testing of a Simple and Flexible Oscillatory Device,  .

  112. Hoffman, D, Brooks, D, and Love, B (). Department of Materials Science and Engineering, Virginia Polytechnic Institute and State University, Blacksburg, Virginia* Department of Composite Materials Engineering, Winona State University, Winona, MN,  .

  113. Love, B (). Revisiting Boltzmann kinetics in applied rheology,  .

  114. Love, B and Kalista, S (). Self-Healing of Thermoplastic Poly (Ethylene-co-Methacrylic Acid) Copolymers,  .

  115. Suggs, A, Dolez, P, and Love, B (). Brill Online Books and Journals,  .

  116. Wereley, N, Yoo, J, Trihan, J, Kotha, S, Suggs, A, Radhakrishnan, R, Love, B, and Sudarshan, T (). BIDISPERSE MAGNETORHEOLOGICAL FLUIDS EXPLOITING MICRON AND NANOMETER SIZED IRON PARTICLES,  .

  117. Xu, Y, Linares, K, Meehan, K, Love, B, and Love, N (). pH Dependent Change in the Optical Properties of Surface Modified Gold Nanoparticles Using Bovine Serum Albumin,  .