Publications

John William Halloran

Professor Emeritus

peterjon@umich.edu

2010 HH Dow
T: (734) 763-1051

Bio

Projects

Publications

Facilities

Group


  1. Wing, B and Halloran, J (2017). Microstress from in the matrix of a melt-infiltrated SiC/SiC ceramic matrix composite,  Journal of the American Ceramic Society, 100(DOI: 10.1111/jace.15038).

  2. Wing, ZN and Halloran, JW (2017). Dielectric Loss in Porous TiO2,  Ceramics International, 43:4618-1621.

  3. Halloran, J (2016). Ceramic Stereolithography: Additive Manufacturing for Ceramics by Photopolymerization, in Materials Issues in Additive Manufacturing,  Annual Review of Materials Research, 46:19-40.

  4. Wing, B, Esmond-White, F, and Halloran, J (2016). Microstress from Crystallization Expansion of Silicon in Reaction Bonded Silicon Carbide,  Journal of the American Ceramic Society, 99(11):3705-3711.

  5. Breneman, RC and Halloran, JW (2015). Effect of Cristobalite on the Strength of Sintered Fused Silica Above and Below the Cristobalite Transformation,  Journal of the American Ceramic Society, 98(5):1611-1617.

  6. Breneman, RC and Halloran, JW (2015). Repeated Cycling of the Beta-AlphaTransformation of CristobaliteJournal of Ceramic Science and Technology, 6(1):55-62.

  7. Gentry, SP and Halloran, JW (2015). Effect of Light Scattering in Absorbing Ceramic Suspensions,  Journal of hte European Ceramic Society, 33:1894-1904.

  8. Halloran, J (2015). A Very Solid Fuel: Ferrous Iron Oxide as a Geochemical Energy Source,  Natural Resources, 6:115-122.

  9. Breneman, RC and Halloran, JW (2014). Kinetics of Cristobalite Formation in Sintered Silica,  Journal of the American Ceramic Society, 97(7):2272-2278.

  10. Breneman, RC and Halloran, JW (2014). Stress Development and Fracture of Surface Nucleated Cristobalite on Silica Glass,  Journal of the American Ceramic Society, 97(11):3483-3488.

  11. Bae, C, Erdonmez, CK, Halloran, JW, and Chiang, Y (2013). Design of Battery Electrodes with Dual-Scale Porosity to Minimize Tortuosity and Maximize Performance,  Advanced Materials, 25(9):1254-1258.

  12. Gangireddy, S, Halloran, JW, and Wing, ZN (2013). Flexural creep of zirconium diboride-silicon carbide up to 2200 degrees C in minutes with non-contact electromagnetic testing,  Journal of the European Ceramic Society, 33(15-16):2901-2908.

  13. Gentry, SP and Halloran, JW (2013). Absorption effects in photopolymerized ceramic suspensions,  Journal of the European Ceramic Society, 33(10):1989-1994.

  14. Gentry, SP and Halloran, JW (2013). Depth and width of cured lines in photopolymerizable ceramic suspensions,  Journal of the European Ceramic Society, 33(10):1981-1988.

  15. Tomeckova, V and Halloran, JW (2013). Radical depletion model for intensity effects on photopolymerization,  Journal of the European Ceramic Society, 33(1):25-35.

  16. Tomeckova, V, Norton, SJ, Love, BJ, and Halloran, JW (2013). Photopolymerization of acrylate suspensions with visible dyes,  Journal of the European Ceramic Society, 33(4):699-707.

  17. Halloran, JW (2012). Nonconventional Polymers in Ceramic Processing: Thermoplastics and MonomersNo source specified

  18. Tomeckova, V and Halloran, JW (2012). Porous Ceramics by Photopolymerization with Terpene-Acrylate Vehicles,  Journal of the American Ceramic Society, 95(12):3763-3768.

  19. Bae, C and Halloran, JW (2011). Influence of Residual Monomer on Cracking in Ceramics Fabricated by Stereolithography,  International Journal of Applied Ceramic Technology, 8(6):1289-1295.

  20. Bae, C and Halloran, JW (2011). Integrally Cored Ceramic Mold Fabricated by Ceramic StereolithographyInternational Journal of Applied Ceramic Technology, 8(6):1255-1262.

  21. Halloran, JW and Guerra, Z (2011). Carbon Building Materials from Coal Char: Durable Materials for Solid Carbon Sequestration to Enable Hydrogen Production by Coal Pyrolysis,  In: Materials Challenges in Alternative and Renewable Energy, ed. by Wicks, G. and Simon, J. and Zidan, R. and LaraCurzio, E. and Adams, T. and Zayas, J. and Karkamkar, A. and Sindelar, R. and GarciaDiaz, B., pp. 61-71.

  22. Halloran, JW, Tomeckova, V, Gentry, S, Das, S, Cilino, P, Yuan, D, Guo, R, Rudraraju, A, Shao, P, Wu, T, Alabi, TR, Baker, W, Legdzina, D, Wolski, D, Zimbeck, WR, and Long, D (2011). Photopolymerization of powder suspensions for shaping ceramics,  Journal of the European Ceramic Society, 31(14):2613-2619.

  23. Park, Y, Kim, H, and Halloran, JW (2011). Permeability Enhancement in Porous-Sintered Reaction-Bonded Silicon Nitrides,  International Journal of Applied Ceramic Technology, 8(4):809-814.

  24. Bae, C and Halloran, J (2010). Influence of Residual Monomer on Cracking in Ceramics Fabricated by Stereolithography,  International Journal of Applied Ceramic Technology.

  25. Bae, C and Halloran, J (2010). Integrally Cored Ceramic Mold Fabricated by Ceramic StereolithographyInternational Journal of Applied Ceramic Technology.

  26. Gangireddy, S, Halloran, J, and Wing, Z (2010). Non-Contact Mechanical Properties of UHTC at Ultrahigh Temperatures Using Lorentz Forces on Electrically Heated Ribbons,  Journal of the European Ceramic Society, 30(11):2183-2189.

  27. Gangireddy, S, Halloran, JW, and Wing, ZN (2010). Non-contact mechanical property measurements at ultrahigh temperatures,  Journal of the European Ceramic Society, 30(11):2183-2189.

  28. Gangireddy, S, Karlsdottir, S, and Halloran, J (2010). Liquid Oxide Flow During Oxidation of Zirconium Diboride-Silicon Carbide Ultra High Temperature Ceramics,  Key Engineering Materials, 434-435:144-148.

  29. Gangireddy, S, Karlsdottir, S, Norton, S, Tucker, J, and Halloran, J (2010). In-Situ Microscopy Observation of Liquid Flow, Zirconia Growth, and CO Bubble Formation During High Temperature Oxidation of Zirconium Diboride-Silicon Carbide,  Journal of the European Ceramic Society, 30(11):2165-2174.

  30. Gangireddy, S, Karlsdottir, SN, and Halloran, JW (2010). Liquid Oxide Flow During Oxidation of Zirconium Diboride-Silicon Carbide Ultra High Temperature Ceramics,  In: High-Performance Ceramics Vi, ed. by Pan, W. and Gong, J., pp. 144-148.

  31. Gangireddy, S, Karlsdottir, SN, Norton, SJ, Tucker, JC, and Halloran, JW (2010). In situ microscopy observation of liquid flow, zirconia growth, and CO bubble formation during high temperature oxidation of zirconium diboride-silicon carbide,  Journal of the European Ceramic Society, 30(11):2365-2374.

  32. Halloran, J and Zuimdie Guerra, Z (2010). Carbon Building Materials from Coal Char: Durable Materials for Solid Carbon Sequestration to Enable Hydrogen Production by Coal Pyrolysis,  Ceramic Transactions, Ceramic Transactions.

  33. Halloran, J, Tomeckova, V, Gentry, S, Das, S, Cilino, P, Yuan, D, Guo, R, Rudraraju, A, Wu, T, Baker, W, Legdzina, D, Wolski, D, Zimbeck, W, and Long, D (2010). Photopolymerization of Powder Suspensions For Shaping Ceramics,  Journal of the European Ceramic Society.

  34. Park, Y, Kim, H, and Halloran, J (2010). Permeability Enhancement in Porous Reaction Bonded Silicon Nitride,  International Journal of Applied Ceramic Technology.

  35. Tomeckova, V and Halloran, J (2010). Critical Energy for Photopolymerization of Ceramic SuspensionsJournal of the European Ceramic Society, 30(16):3273-3282.

  36. Tomeckova, V and Halloran, J (2010). Cure Depth for Photopolymerization of Ceramic Suspensions,  Journal of the European Ceramic Society, 30(15):3023-3033.

  37. Tomeckova, V and Halloran, J (2010). Flow Behavior of Polymerizable Ceramic Suspensions as a Function of Ceramic Volume Fraction and Temperature,  Journal of the European Ceramic Society.

  38. Tomeckova, V and Halloran, J (2010). Predictive Models for Photopolymerization of Ceramic SuspensionsJournal of the European Ceramic Society, 30(14):2833-2840.

  39. Tomeckova, V and Halloran, JW (2010). Critical energy for photopolymerization of ceramic suspensions in acrylate monomers,  Journal of the European Ceramic Society, 30(16):3273-3282.

  40. Tomeckova, V and Halloran, JW (2010). Cure depth for photopolymerization of ceramic suspensionsJournal of the European Ceramic Society, 30(15):3023-3033.

  41. Tomeckova, V and Halloran, JW (2010). Predictive models for the photopolymerization of ceramic suspensions,  Journal of the European Ceramic Society, 30(14):2833-2840.

  42. Das, S, Halloran, J, Baker, W, Graham, L, Cilino, P, Yuan, D, Tomeckova, V, Torres-Garibay, C, Shao, P, Rudraraju, A, and Kambly, K (2009). Direct Digital Manufacturing of Airfoils via Large Area Maskless Photopolymerization,  Proceedings of the International Solid Freeform Fabrication Symposium.

  43. Halloran, JW (2009). Non-Conventional Polymers in Ceramic Processing: Thermoplastics and MonomersCeramics Science and Technology, Synthesis and Processing.

  44. Karlsdottir, S and Halloran, J (2009). Formation of Oxide Films on Zirconium Diboride- Silicon Carbide Composites During Oxidation: Evolution with Time and Temperature,  Journal of the American Ceramics Society, 92(6):1328-1332.

  45. Karlsdottir, S and Halloran, J (2009). Oxidation of Zirconium Diboride- Silicon Carbide: Influence of SiC Content on Solid and Liquid Oxide Phases Formed During Oxidation,  Journal of the American Ceramics Society, 92(2):481-486.

  46. Shao, P, Yuan, D, Kambly, K, Tomeckova, V, Torres-Garibay, C, Halloran, J, and Das, S (2009). Photochemistry Model for Large Area Maskless Photopolymerization,  Proceedings of the International Solid Freeform Fabrication Symposium.

  47. Wiratmoko, A and Halloran, J (2009). Fabricated Carbon from Minimally-Processed Coke and Coal Tar Pitch as Carbon-Sequestering Construction Materials,  Journal of Materials Science, 44(8):2097-2100.

  48. Yuan, D, Kambly, K, Shao, P, Rudraraju, A, Cilino, P, Tomeckova, V, Torres-Garibay, C, Halloran, J, and Das, S (2009). Experimental Investigations on a Photocurable Ceramic Material System for Large Area Maskless Photopolymerization,  Proceedings of the International Solid Freeform Fabrication Symposium.

  49. Basch, J, Halloran, J, and LaBreche, T (2008). Redefining Ceramic Fuel Cells,  Ceramic Industry.

  50. Diggs, A, Bae, C, Tseng, W, Flanagan, C, Halloran, J, and Hollister, S (2008). Assessing in vitro Degradation of Calcium Phosphate Ceramics via Micro-computed Tomography,  Key Engineering Materials, Bioceramics 21:637-640.

  51. Do, T and Halloran, J (2008). Breath Figure Patterns in the Oxidation of Boron Nitride,  Journal of the American Ceramics Society, 91(8):2730-2731.

  52. Halloran, J (2008). Extraction of Hydrogen from Fossil Resources with Production of Solid Carbon Materials,  International Journal of Hydrogen Energy, 33:2218-2224.

  53. Halloran, J, Bae, C, Torres-Garibay, C, Tomeckova, V, Das, S, and Baker, W (2008). Manufacture of Complex Ceramics by Photopolymerization,  Global Roadmap for Ceramics-ICC2 Proceedings:369-378.

  54. Karlsdottir, S and Halloran, J (2008). Formation of Oxide Films on Zirconium Diboride- Silicon Carbide Composites During Oxidation: Relation of Subscale Recession to Liquid Oxide Flow,  Journal of the American Ceramics Society, 91(11):3652-3658.

  55. Karlsdottir, S, Halloran, J, and Grundy, A (2008). Zirconium Transport by Liquid Convection During Oxidation of Zirconium Diboride- Silicon Carbide,  J. American Ceramics Soc., 91(1):272-277.

  56. Alexander, P, Brei, D, and Halloran, J (2007). DEPP Functionally Graded Piezoceramics via Micro-Fabrication by Co-Extrusion,  Journal of Materials Science, 42:5805-5814.

  57. Brakora, K, Sarabandi, K, and Halloran, J (2007). Design of 3-D Monolithic MMW Antennas Using Ceramic Stereolithography,  IEEE Transactions on Antennas and Propagation, 55(3):790-797.

  58. Crumm, A and Halloran, J (2007). Negative Poisson Ratio Structures Made from Zirconia and from Nickel Using Co-extrusion,  Journal Of Materials Science, 42(4):1336-1342.

  59. Crumm, A, Halloran, J, Silva, E, and Montero de Espinosa, F (2007). Microconfigured Piezoelectric Artificial Materials for Hydrophones,  Journal of Materials Science, 42(11):3944-3950.

  60. Do, T and Halloran, J (2007). Fabrication of Polymer Magnetics,  2007 IEEE Antennas And Propagation Society International Symposium, 1-12:1566-1569.

  61. Ergun, C, Liu, H, Halloran, J, and Webster, T (2007). Increased osteoblast adhesion on nanograined hydroxyapatite and tricalcium phosphate containing calcium titanate”,  Journal of Biomedical Materials Research Part A, 80A(4):990-997.

  62. Halloran, J (2007). Carbon-Neutral Economy with Fossil Fuel-Based Hydrogen Energy and Carbon Materials,  Energy Policy, 35:4839-4846.

  63. Karlsdottir, S and JW, H (2007). Rapid Characterization of Ultra-High Temperature Ceramics,  Journal of the American Ceramics Society, 90(10):3233-3238.

  64. Karlsdottir, S, Halloran, J, and Henderson, C (2007). Convection Patterns in Liquid Oxide Films on ZrB2-SiC Composites Oxidized at High Temperature,  Journal of the American Ceramics Society, 90(9):2863-2867.

  65. Karlsdottir, S, Halloran, J, Monteverde, F, and Bellosi, A (2007). Oxidation of ZrB2-SiC: Comparison of furnace heated coupons and self-heated ribbons,  Ceramic Transactions, 28(2):327-336.

  66. Miao, W, Halloran, J, and Brei, D (2007). Suspension Polymerization Casting of Lead Zirconate Titanate, part II: Acrylate System,  Journal of Materials Science, 42(19):8311-8331.

  67. Reilly, C, Halloran, J, and Silva, E (2007). Piezoelectric Hydrophones from Optimal Designs, I: Design and Fabrication,  Journal of Materials Science, 42:4824-4831.

  68. Reilly, C, Halloran, J, Silva, E, and Montero de Espinosa, F (2007). Piezoelectric Hydrophones from Optimal Designs, II: Properties,  Journal of Materials Science, 42(13):4810-4814.

  69. Volakis, J, Chen, C, Halloran, J, and Koulouridis, S (2007). Minature VHF.UHF Conformal Spirals with Inductive and Ferrite Loading,  2007 IEEE Antennas And Propagation Society International Symposium, 1-12:5-8.

  70. Jongpaiboonkit, L, Lin, C, Krebsbach, P, Hollister, S, and Halloran, J (2006). Mechanical behavior of complex 3D calcium phosphate cement scaffolds fabricated by indirect solid freeform fabrication in vivoBioceramics 18, Pts 1 And 2, 309-311:957.

  71. Karlsdottir, S and Halloran, J (2006). Role of rare-earth oxide additives on mechanical properties and oxidation behavior of Si3N4/BN fibrous monolith ceramics,  Journal of the American Ceramic Society, 89(5):1615.

  72. Psychoudakis, D, Volakis, J, Wing, Z, Pillai, S, and Halloran, J (2006). Enhancing UHF antenna functionality through dielectric inclusions and texturization,  IEEE Transactions On Antennas And Propagation, 54(2):317.

  73. Shanti, N, Araki, K, and Halloran, J (2006). Particle redistribution during dendritic solidification of particle suspensions,  Journal of the American Ceramic Society, 89(8):2444.

  74. Wing, Z, Halloran, J, Gong, X, She, W, Hoppenjans, E, and Chappell, W (2006). Fabrication and properties of an anisotropic TiO2 dielectric composite,  Journal of the American Ceramic Society, 89(9):2812.

  75. Wing, Z, Halloran, J, Zhang, Q, and McGinn, P (2006). Variable dielectrics in the calcium magnesium titanate system characterized with scanning microwave microscopy,  Journal of the American Ceramic Society, 89(5):1610.

  76. Gong, X, She, W, Hoppenjans, E, Wing, Z, Geyer, R, Halloran, J, and Chappell, W (2005). Tailored and anisotropic dielectric constants through porosity in ceramic components,  IEEE Transactions On Microwave Theory And Techniques, 53(11):3638.

  77. Kiyoshi Araki, JWH (2005). Porous Ceramic Bodies with Interconnected Pore Channels by a Novel Freeze Casting Technique,  Journal of the American Ceramic Society, 88(5):1108.

  78. Koh, Y and Halloran, J (2005). Thermoplastic Green Machining For Textured Dielectric Substrate For Broadband Miniature Antenna,  Journal Of The American Ceramic Society, 88(2):297.

  79. Koh, Y, Knapp, A, Halloran, J, Kim, H, and Kim, H (2005). Co-firing of spatially varying dielectric Ca-Mg-silicate and Bi-Ba-Nd-titanate composite,  Journal of the American Ceramic Society, 88(10):2690.

  80. Wu KC, SKSMHJ (2005). Prediction of ceramic stereolithography resin sensitivity from theory and measurement of diffusive photon transport,  JOURNAL OF APPLIED PHYSICS, 98(2).

  81. Wu, K and Halloran, J (2005). Photopolymerization Monitoring Of Ceramic Stereolithography Resins By Ftir Methods,  Journal Of Materials Science, 40(1):71.

  82. Wu, K, Seefeldt, K, Solomon, M, and al., e (2005). Prediction of ceramic stereolithography resin sensitivity from theory and measurement of diffusive photon transport,  JOURNAL OF APPLIED PHYSICS, 98((2)).

  83. Araki, K and Halloran, J (2004). New Freeze-Casting Technique For Ceramics With Sublimable VehiclesJournal Of The American Ceramic Society, 87(10):1859.

  84. Araki, K and Halloran, J (2004). Room-Temperature Freeze Casting For Ceramics With Nonaqueous Sublimable Vehicles In The Naphthalene-Camphor Eutectic System,  Journal Of The American Ceramic Society, 87(11):2014.

  85. Koh, Y and Halloran, J (2004). Green Machining Of A Thermoplastic Ceramic-Ethylene Ethyl Acrylate/Isobutyl Methacrylate Compound,  Journal Of The American Ceramic Society, 87(8):1575.

  86. Koh, Y, Kim, H, Kim, H, and Halloran, J (2004). Thermal Shock Resistance Of Fibrous Monolithic Si3n4/Bn Ceramics,  Journal Of The European Ceramic Society, 24(8):2339.

  87. Qi, J and Halloran, J (2004). Negative Thermal Expansion Artificial Material From Iron-Nickel Alloys By Oxide Co-Extrusion With Reductive Sintering,  Journal Of Materials Science, 39(13):4113.

  88. Reilly, C, Chappell, W, Halloran, J, and Katehi, L (2004). High-Frequency Electromagnetic Bandgap Structures Via Indirect Solid Freeform Fabrication,  Journal Of The American Ceramic Society, 87(8):1446.

  89. Koh, Y, Kim, H, Kim, H, and Halloran, J (2003). Fabrication And Compressive Strength Of Macrochannelled Tetragonal Zirconia Polycrystals With Calcium Phosphate Coating Layer,  Journal Of Materials Research, 18(9):2009.

  90. Koh, Y, Kim, H, Kim, H, and Halloran, J (2003). Macrochanneled Tetragonal Zirconia Polycrystals Coated By A Calcium Phosphate Layer,  Journal Of The American Ceramic Society, 86(12):2027.

  91. Miao, W, Halloran, J, and Brei, D (2003). Suspension Polymerization Casting Of Lead Zirconate Titanate, Part I: Acrylamide Hydrogel System,  Journal Of Materials Science, 38(12):2571.

  92. Chu, T, Hollister, S, Halloran, J, Feinberg, S, and Orton, D (2002). Manufacturing And Characterization Of 3-D Hydroxyapatite Bone Tissue Engineering Scaffolds,  Reparative Medicine: Growing Tissues And Organs, 961:114.

  93. Chu, T, Orton, D, Hollister, S, Feinberg, S, and Halloran, J (2002). Mechanical And In Vivo Performance Of Hydroxyapatite Implants With Controlled Architectures,  Biomaterials, 23(5):1283.

  94. Koh, Y, Kim, H, Kim, H, and Halloran, J (2002). Effect Of Oxidation On Mechanical Properties Of Fibrous Monolith Si3n4/Bn At Elevated Temperatures In Air,  Journal Of The American Ceramic Society, 85(12):3123.

  95. Koh, Y, Kim, H, Kim, H, and Halloran, J (2002). Fabrication Of Macrochannelled-Hydroxyapatite Bioceramic By A Coextrusion Process,  Journal Of The American Ceramic Society, 85(10):2578.

  96. Alexander, P, Brei, D, Miao, W, Halloran, J, Gentilman, R, Schmidt, G, Mcguire, P, and Hollenbeck, J (2001).Fabrication And Experimental Characterization Of D(31) Telescopic Piezoelectric Actuators,  Journal Of Materials Science, 36(17):4231.

  97. Chu, T, Halloran, J, Hollister, S, and Feinberg, S (2001). Hydroxyapatite Implants With Designed Internal Architecture,  Journal Of Materials Science-Materials In Medicine, 12(6):471.

  98. Feinberg, S, Hollister, S, Halloran, J, Chu, T, and Krebsbach, P (2001). Image-Based Biomimetic Approach To Reconstruction Of The Temporomandibular Joint,  Cells Tissues Organs, 169(3):309.

  99. Hollister, S, Zysset, P, Guldberg, R, Chu, T, and Halloran, J (2001). Engineering Microstructures To Evaluate And Replace Trabecular Bone,  Noninvasive Assessment Of Trabecular Bone Architecture And The Competence Of Bone, 496:199.

  100. Seerden, K, Reis, N, Evans, J, Grant, P, Halloran, J, and Derby, B (2001). Ink-Jet Printing Of Wax-Based Alumina Suspensions,  Journal Of The American Ceramic Society, 84(11):2514.